PG1030 COMPLETE 5-LUG DISC BRAKE KIT ≤7.5K TOP-MOUNT (DEXTER / UFP)

REPRESENTATION PHOTO

IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME.

MAGIC TILT BRAKE KIT ~ PG1030

TYPE: COMPLETE DISC BRAKE
DIAMETER: 10"
BOLT PATTERN: 5 x 4.5"
CAPACITY: UP TO 7,500 LBS.
SPINDLE: 1-1/16" x 1-3/8"
TONGUE SIZE: 3x3, 3x4, 3x5
FINISH: E-COAT
BRAND: DEXTER / UFP
APPLICATION: ONE OR TWO 3,500-POUND (5-LUG) AXLE TRAILERS

NOTES:
NEW TOP-MOUNT ACTUATOR REPLACES THE PG1088 INLINE 3-HOLE ACTUATOR ON 3" TALL TONGUES.
NEW HOLES WILL NEED TO BE DRILLED IN THE TRAILER TONGUE.
COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES.

UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125
IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED).
ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED)

INCLUDES:
2 x BEARING 1-1/16" (44649)
2 x BEARING 1-3/8" (68149)
2 x SEAL 1-3/8" UFP (257-168)
1 x BEARING PROTECTOR SET SS 1.980
1 x PG1072 ACTUATOR TOP MOUNT DISC DEMCO #7,000
1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8'
1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23'
2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP
1 x CALIPER FITTING PLUG UFP #32212
1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING)
1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING)
4 x 7/16" x 1" SHCS BOLT UFP DISC CALIPER
1 x PL2128 5-WAY FULL GROUND WIRE HARNESS 30'
6 x PLASTIC WIRE TIE HD 14-1/2"
2 x 1/4" CHAIN W/ ONE HOOK 40"
3 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5
3 x NUT LOCK NI 1/2-13 PLATED

OWNERS MANUAL