PG1038 COMPLETE 8-LUG DISC BRAKE KIT 12K TO 20K (DEXTER / UFP)

REPRESENTATION PHOTO

IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME.

MAGIC TILT BRAKE KIT ~ PG1038

TYPE: COMPLETE DISC BRAKE KIT
DIAMETER: 12"
BOLT PATTERN: 8 x 6.5"
SPINDLE: 1-1/4" x 1-3/4"
CAPACITY: UP TO 20,000 LBS.
FINISH: E-COAT
BRAND: DEXTER / UFP
APPLICATION: TWO OR THREE 6,000 TO 7,000-POUND (8-LUG) AXLE TRAILERS
                          TANDEM 8,000-POUND (8-LUG) AXLE TRAILERS

NOTES:
COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES.
UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2130
IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2165 CONVERSION KIT (NOT INCLUDED)
ADDITIONAL AXLE(S) BRAKE KIT PG1044 (NOT INCLUDED)

INCLUDES:
2 x BEARING 1-1/4" UFP
2 x BEARING 1-3/4" UFP (25580)
2 x SEAL 1-3/4" UFP (21333)
1 x BEARING PROTECTOR SET SS 2.717
1 x PG1096 DEMCO ACTUATOR DISC #20000
1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8'
1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23'
2 x PG2028-1 DISC ROTOR AND HUB 12" 8-LUG UFP
1 x CALIPER FITTING PLUG UFP #32212
1 x PL2142 5-WAY FULL GROUND WIRE HARNESS 40'
1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP DB3 (DOUBLE BANJO FITTING)
1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP DB3 (DOUBLE BANJO FITTING)
4 x DISC CALIPER BOLT 7/16" x 1" SHCS (UFP)
6 x PLASTIC WIRE TIE HD 14-1/2"
2 x CHAIN W/ ONE HOOK 40"
4 x CAPSCREW PLATED NC 1/2" x 4-1/2" GR5
4 x NUT LOCK NI 1/2-13 PLATED

OWNERS MANUAL