PG1033 COMPLETE 5-LUG DISC BRAKE KIT 7.5K TO 16K (DEXTER / UFP)

REPRESENTATION PHOTO

IF YOU WANT TO ADD BRAKES TO A TRAILER THAT WAS NEVER EQUIPPED WITH THEM, MAKE SURE THERE IS AT LEAST FOUR-INCHES OF CLEARANCE FROM THE BRAKE MOUNTING PLATE ON THE AXLE OR TORSION ARM TO THE OUTSIDE EDGE OF THE FRAME.

MAGIC TILT BRAKE KIT ~ PG1033

TYPE: COMPLETE DISC BRAKE KIT
DIAMETER: 10"
BOLT PATTERN: 5 x 4.5"
CAPACITY: UP TO 16,000 LBS.
SPINDLE: 1-1/16" x 1-3/8"
FINISH: E-COAT
BRAND: DEXTER / UFP
APPLICATION: THREE OR MORE 3,500-POUND (5-LUG) AXLE TRAILERS

NOTES:
COMES WITH PG4856 DOUBLE BANJO FITTING TO CONNECT BRAKE LINES.
UFP SPINDLE MOUNTING HARDWARE (NOT INCLUDED): PH2125
IF USING ON NON-UFP AXLES WITH 1" SPINDLE THREADS YOU WILL NEED THE PH2160 CONVERSION KIT (NOT INCLUDED)
ADDITIONAL AXLE(S) BRAKE KIT PG1040 (NOT INCLUDED)

INCLUDES:
2 x BEARING 1-1/16" (44649)
2 x BEARING 1-3/8" (68149)
2 x SEAL 1-3/8" UFP (257-168)
2 x BEARING PROTECTOR 1.980 STAINLESS
1 x PG1095 ACTUATOR IN-LINE DISC #16,000
1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 8'
1 x HYDRAULIC BRAKE HOSE W/ SWIVEL 23'
2 x PG2026-1 DISC ROTOR AND HUB 10" 5-LUG UFP
1 x CALIPER FITTING PLUG UFP #32212
1 x PG5003 DISC BRAKE CALIPER ASSEMBLY LH UFP (DOUBLE BANJO FITTING)
1 x PG5005 DISC BRAKE CALIPER ASSEMBLY RH UFP (DOUBLE BANJO FITTING)
4 x 7/16" x 1" CALIPER BOLT UFP
1 x PL2128 5-WAY HARNESS 30'
6 x PLASTIC WIRE TIE HD 14-1/2"
2 x 1/4" CHAIN W/ ONE HOOK 40"
4 x CAPSCREW PLATED NC 1/2 x 4-1/2 GR5
4 x NUT LOCK NI 1/2-13 PLATED

OWNERS MANUAL